You can access current Standards and Field Guides, subscriptions, and the webstore.
The IICRC Standards serve to develop common, industry-accepted language and terminology that enables us to more universally discuss concepts and procedures regarding cleaning, inspection, and restoration. The IICRC is an American National Standards Institute (ANSI) member and accredited standards developer. ANSI coordinates standards, conformity assessment, and related activities in the United States of America. ANSI is responsible for overseeing the development of national consensus standards and verifying that the requirements for due process, consensus, and other criteria for approval have been met by the standard’s developer. An American National Standard (ANS) is a Voluntary Consensus Standard, and unless mandated by law, compliance is voluntary. However, some have been adopted as code or regulation by local, state, or federal authorities.
ANSI coordinates the U.S. voluntary consensus standards system, providing a neutral forum for the development of policies on standards issues and serves as a watchdog for standards development and conformity assessment programs and processes. The ANSI process serves all standardization efforts in the United States by providing and promoting a process that withstands scrutiny while protecting the rights and interests of every participant. In essence, ANSI standards quicken the market acceptance of products while making clear how to improve the safety of those products for the protection of consumers. The IICRC serves as the secretariat for several ANSI committees that develop cleaning, inspection, and restoration related standards. NOTE: American National Standards may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of approval. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute.
Brandon Burton: Standards Chairman
Darren Foote: Restoration and Remediation Standards Vice Chairman
Ryan Tasovac: Cleaning and Inspection Standards Vice Chairman
Mili Washington: Standards Director
Cheryl Smith: Standards Coordinator
Erica Harrison: Standards Administrator
These Standards are available for purchase on the webstore.
Seventh Edition Published 2021
ANSI/IICRC S100 describes the procedures, methods, and systems to be followed when performing professional commercial and residential textile floor coverings (e.g., carpet and rugs) maintenance and cleaning. The purpose of this standard is to define criteria and methodology for evaluating carpet types, characteristics, and conditions and for establishing procedures for appearance retention, soil removal, and indoor environmental quality.
First Edition Published 2021
With hard surface floor covering failures rising, there is a need for a third party unbiased inspection evaluation and methodologies of a procedural standard for professionally inspecting hard surface floor covering. The new BSR/IICRC S220 Standard on Hard Surface Floor Covering Inspection will include inspection of hard surface floor coverings, including stone, marble, laminate, wood, ceramic, and resilient. The document will establish a procedural standard for professionally inspecting hard surface floor coverings.
First Edition Published 2000
This Standard is currently in Revision
IICRC S300 is a procedural standard. It has been written using reliable principles, research, and practical experience, plus consultation with and information obtained from numerous sources. These include allied tradespersons; cleaning chemical and equipment formulators and manufacturers; upholstery and furniture manufacturers; international, national and regional trade associations; organizations serving the professionals cleaning industry, both independent and franchise; cleaning industry training schools; cleaning service companies; and others with specialized experience. IICRC S300 provides a specific set of practical standards for upholstery cleaning. It does not attempt to teach comprehensive upholstery cleaning procedures; rather, it provides the foundational principle for proper cleaning practice.
Fifth Edition Published 2021
Standard describes the procedures to be followed and the precautions to be taken when performing water damage restoration in residential, commercial, and institutional buildings, and the systems and personal property contained within those structures.
This Standard assumes that the determination and correction of the underlying source or cause of the water intrusion leading to the water damage is the responsibility of the property owner and not the restorer, although the property owner may contract with the restorer or other specialized experts to perform these services.
Third Edition Published 2015
The ANSI/IICRC S520 is a procedural standard for the remediation of mold damaged structures and contents. The ANSI/IICRC S520 is based on reliable remediation and restoration principles, research and practical experience, and attempts to combine essential academic principles with practical elements of water damage restoration for technicians facing "real-life" mold remediation challenges. The S520 and R520 are written for use by those involved in the mold remediation industry, and is the result of collaboration among microbiologists and other scientists, public health professionals, industrial hygienists, remediation contractors, restoration service companies, cleaning and restoration training schools, trade associations that service the professional restoration industry, allied trade-persons and others with related professional and practical experience.
ANSI/IICRC S520-2015 Standard and IICRC R520 Reference Guide is published as two separate documents: the standard itself and a supplementary reference guide. The procedural standard is supported by the reference guide. The intent is to use the principles outlined in the reference guide as a tool to better understand and apply the standard itself. However, the reference guide is not considered part of this standard.
First Edition Published 2017
This Standard is currently in Revision
ANSI/IICRC S540 Standard defines criteria and methodology used by the technician for inspecting and investigating blood and other potentially infectious material (OPIM) contamination and for establishing work plans and procedures. The Standard describes the procedures to be followed by professionals and the precautions to be taken when performing trauma and crime scene cleanup regardless of surface, item, or location. This standard assumes that all scenes have been released by law enforcement or regulatory agencies.
First Edition Published 2014
The ANSI/IICRC S800: 2014 includes inspection of textile floor covering, including carpet and rugs. The S800 establishes a procedural standard and reference guide for professionally inspecting textile floor coverings. The standard defines basic operational procedures and techniques for inspecting/evaluating: carpet types, characteristics, and conditions; specification; installation procedures; and post-installation maintenance and cleaning. This enables professional inspectors to determine appropriate procedures for inspecting textile floor coverings. S800 is not written to teach detailed inspection procedures; numerous manuals, videotapes, workshops, and seminars are available to teach comprehensive textile floor covering inspection procedures.
This standard was created for use primarily by professional inspectors and secondarily for carpet manufacturers, product suppliers, building contractors, architects, specifiers, designers, distributors, flooring retailers, end-users, facility managers, institutions, and others involved in the textile flooring inspection industry.
With various individuals competing for the stone maintenance and restoration dollar, there is a need to standardize terminology and service procedure methodologies to bring consistency to the industry. This new Standard will encompass the cleaning, maintenance, restoration, rehabilitation, preservation methodologies, and repair for interior dimension stone.
This standard will focus on the principles, methods, and processes to assess, inventory, pack-out, clean, restore, and enhance the appearance of contents. Contents are defined as materials, furniture, fixtures, and equipment located inside a building envelope. It is sometimes defined as personal property.
This Standard is currently accepting applications here.
This standard establishes a procedural standard for the professional cleaning and maintenance of leather furnishings. It is intended for use by professional cleaners, upholstery manufacturers, retailers, distributors, industry suppliers, specifiers, homeowners, property or facility managers, housekeepers and insurance companies, and others. Factors that will be considered include, but are not limited to, the leather type, color, style, construction, and use. These dictate the specific cleaning systems and methods to be used. It is based on reliable cleaning principles, review of available scientific and industry literature, and information and practical experience. Stakeholders include professional cleaners, furnishings manufacturers, retailers, distributors, industry suppliers, specifiers, homeowners, property or facility managers, housekeepers, insurance companies, and others.
This standard will focus on the principles, methods, and processes to clean, maintain, and restore the built environment. We define the built environment as materials, building assemblies, structures, furniture, fixtures, and equipment located inside a building envelope. Further, this standard will focus on the commercial built environment and define tasks, frequencies, production expectations, goals, and results.
This standard will provide a specific set of practical principles, methods, and processes to clean, sanitize, and evaluate the cleaning of the built environment where verifiable, hygienic cleaning is required. This standard will also establish methods and processes to document, evaluate, clean, sanitize, and apply disinfectant to surfaces that require a higher level of cleaning.
This new Standard will establish a proper methodology and protocol for the inspection and evaluation of structure that is known or suspected to have mold contamination, and will promote proper methodology and processes for the assessment of mold-contaminated structures.
The S550 is a procedural standard for performing water damage restoration in commercial, industrial institutional, and complex residential structures, systems and furniture, fixtures and equipment. The proposed standard includes: Building and Material Science; Drying Complex Materials and Systems; Safety and Health; Project Coordination, Documentation, Logistics and Risk Management; Inspections, Preliminary Determinations and Pre-Restoration Evaluations; Limitations, Complexities, Complications, and Conflicts; Specialized Experts; Restoration Procedures; HVAC; Evaluation & Furniture, Fixtures and Equipment; Historical Buildings; Government, and Healthcare Facilities.
This document will provide a specific set of practical standards for assessing the impact of structural and property loss events on HVAC systems. These events may include water, fire, mold, and smoke related damage.
The BSR/IICRC S700 Standard for Professional Fire and Smoke Damage Restoration will provide a specific set of practical principles, methods, and processes for the restoration of fire and smoke damaged structural materials, assemblies, and systems. The standard will cover the entire process of evaluation, mitigation, cleaning, and restoration. This standard will cover scope development, temporary structures and repairs, engineering controls, proper cleaning methods and processes, and proper chain of custody documentation of the property being restored.
The BSR/IICRC S710 Standard for the Development of a Scope of Work in a Fire and Smoke Damaged Environment will provide a specific set of practical standards for the development of a scope of work in a fire and smoke damaged environment. The Standard will provide measures for preparing a scope of work in a fire and smoke damaged environment, as this is not specifically covered in any detail in existing Standards.
The BSR/IICRC S740 Standard for Professional Restoration of Fire and Smoke Damaged Personal Items will provide a specific set of practical principles, methods, and processes to evaluate and restore fire and smoke damaged porous and nonporous personal items, commonly known as contents or personal property. This standard will also establish methods and processes to document the chain of custody of these items, including: inventory, packing, storage, cleaning, verification, and return to the customer. This standard will outline the proper handling, storage, and care of these items.
This Standard will include procedures to be followed and the precautions to be taken when organizing the work for a project involving the remediation and cleaning of a site that is contaminated by the residues of illicit drugs, cannabis, and tobacco. This standard will assume that all scenes have been released by law enforcement or regulatory agencies.
This Standard is currently in Revision
IICRC S300 is a procedural standard. It has been written using reliable principles, research, and practical experience, plus consultation with and information obtained from numerous sources. These include allied tradespersons; cleaning chemical and equipment formulators and manufacturers; upholstery and furniture manufacturers; international, national and regional trade associations; organizations serving the professionals cleaning industry, both independent and franchise; cleaning industry training schools; cleaning service companies; and others with specialized experience. IICRC S300 provides a specific set of practical standards for upholstery cleaning. It does not attempt to teach comprehensive upholstery cleaning procedures; rather, it provides the foundational principle for proper cleaning practice.
The ANSI/IICRC S520 is a procedural standard for the remediation of mold damaged structures and contents. The ANSI/IICRC S520 is based on reliable remediation and restoration principles, research and practical experience, and attempts to combine essential academic principles with practical elements of water damage restoration for technicians facing "real-life" mold remediation challenges. The S520 and R520 are written for use by those involved in the mold remediation industry, and is the result of collaboration among microbiologists and other scientists, public health professionals, industrial hygienists, remediation contractors, restoration service companies, cleaning and restoration training schools, trade associations that service the professional restoration industry, allied trade-persons and others with related professional and practical experience.
ANSI/IICRC S520-2015 Standard and IICRC R520 Reference Guide is published as two separate documents: the standard itself and a supplementary reference guide. The procedural standard is supported by the reference guide. The intent is to use the principles outlined in the reference guide as a tool to better understand and apply the standard itself. However, the reference guide is not considered part of this standard.
This Standard is currently in Revision
ANSI/IICRC S540 Standard defines criteria and methodology used by the technician for inspecting and investigating blood and other potentially infectious material (OPIM) contamination and for establishing work plans and procedures. The Standard describes the procedures to be followed by professionals and the precautions to be taken when performing trauma and crime scene cleanup regardless of surface, item, or location. This standard assumes that all scenes have been released by law enforcement or regulatory agencies.
The ANSI/IICRC S800: 2014 includes inspection of textile floor covering, including carpet and rugs. The S800 establishes a procedural standard and reference guide for professionally inspecting textile floor coverings. The standard defines basic operational procedures and techniques for inspecting/evaluating: carpet types, characteristics, and conditions; specification; installation procedures; and post-installation maintenance and cleaning. This enables professional inspectors to determine appropriate procedures for inspecting textile floor coverings. S800 is not written to teach detailed inspection procedures; numerous manuals, videotapes, workshops, and seminars are available to teach comprehensive textile floor covering inspection procedures.
This standard was created for use primarily by professional inspectors and secondarily for carpet manufacturers, product suppliers, building contractors, architects, specifiers, designers, distributors, flooring retailers, end-users, facility managers, institutions, and others involved in the textile flooring inspection industry.
IICRC Field Guide for Safety and Health for Professional Cleaners’ and ‘IICRC Field Guide for Safety and Health for Disaster Restoration Professionals’ will supplement existing IICRC restoration standards and certification classes. The guides will include valuable information about safety and health hazard identification procedures, safe work practices, and control methods that prudent disaster restoration and cleaning professionals should employ.
These new field guides serve to address the needs of all participants of the cleaning and restoration industry, including cleaners, restorers, managers, end users, insurance adjusters, and indoor environmental professionals.
IICRC Field Guide for Safety and Health for Professional Cleaners’ and ‘IICRC Field Guide for Safety and Health for Disaster Restoration Professionals’ will supplement existing IICRC restoration standards and certification classes. The guides will include valuable information about safety and health hazard identification procedures, safe work practices, and control methods that prudent disaster restoration and cleaning professionals should employ.
These new field guides serve to address the needs of all participants of the cleaning and restoration industry, including cleaners, restorers, managers, end users, insurance adjusters, and indoor environmental professionals.
Interested in volunteering and becoming a Standards Consensus Body Member?
See what Standards are currently accepting applications.
Visit the Standards FAQs page for more information or get in touch with us.
